Click here for pdf
RESILAC 162 is a modified hydroxyl functional acrylic resin designed for formulation of high performance Two component Polyurethane Coatings.
Appearance : Clear Transparent viscous Liquid
Brookefield RVT Spl 4 / RPM 20 : 25 - 40
Max Acid Value : 6 – 8 mg KOH / g
Hydroxyl Equiv weight : 1100 on solids basis
Solvents : Xylene
% Solids @ 105°C / 90 min
Viscosity @ 25°C in Poise
: 55 ± 2


  • RESILAC 162 can be used with NCO / OH ratio of 1:1.
  • RESILAC 162 can be mixed with conventional hardeners like Desmodur N75 and with aliphatic Hardeners
  • The mixing ratio of 77:23 can be followed.
  • Alcoholic solvents must not be used as thinners.
  • For faster curing, catalyst like DBTL can be added. However, effect on pot life should be studied in such cases.
  • Typical dosage is 0.001% on resin solid.
  • Pot LIFE: typically upto one day if stored in proper conditions.
  • To enhance the performance, the use of catalysts like dibutyl tin laureate and UV absorbers are recommended.


  • RESILAC 162 is used as a resin for formulating the following coatings:
  • Maintenance coatings for tanks, Plant equipment offshore structures.
  • Transport finishes for Trucks, buses, ships.
    (for handling please refer MSDS)

This information is based on our present state of knowledge and belief and is without any obligation on our part.

  © C&E. All Rights Reserved